Archive
Return to Index
Read Responses
Sand, use red filler Dupli-color, sand, Dupli-color #1699, sand, paint......my way *NM*
In Response To:
For those of you that are working with 3d printed bodies, are you filling the lines or sanding them smooth? Or both? *NM*
()
Messages In This Thread
For those of you that are working with 3d printed bodies, are you filling the lines or sanding them smooth? Or both? *NM*
Sand, use red filler Dupli-color, sand, Dupli-color #1699, sand, paint......my way *NM*
Sand, give it a good shot of primer, gas it out good and sand the areas you missed, sand again for good measure prime and shoot color. *NM*
Those who have worked with 3D prints - do you find it sands?
That's a good question! Does it sand like poured/cast resin, more like styrene, or harder than that? Just want to know what to expect. *NM*
Not all printed resin is the same. some I have are like cast resin some are as hard as a rock.
It sands just fine. There are different types of resin, but the standard and water washable sand very well. I use the stuff as filler also. *NM*
