Archive
Return to Index
Read Responses
It sands just fine. There are different types of resin, but the standard and water washable sand very well. I use the stuff as filler also. *NM*
In Response To:
Those who have worked with 3D prints - do you find it sands?
()
Messages In This Thread
For those of you that are working with 3d printed bodies, are you filling the lines or sanding them smooth? Or both? *NM*
Sand, use red filler Dupli-color, sand, Dupli-color #1699, sand, paint......my way *NM*
Sand, give it a good shot of primer, gas it out good and sand the areas you missed, sand again for good measure prime and shoot color. *NM*
Those who have worked with 3D prints - do you find it sands?
That's a good question! Does it sand like poured/cast resin, more like styrene, or harder than that? Just want to know what to expect. *NM*
Not all printed resin is the same. some I have are like cast resin some are as hard as a rock.
It sands just fine. There are different types of resin, but the standard and water washable sand very well. I use the stuff as filler also. *NM*