Messages In This Thread

• NEED HELP: Windshield washer reservoir--hose goes from the reservoir to ?? on the washer motor/pump? Google PIX not much help. *NM*
  • All of my cars have the pump built into the reservoir, then a line goes from the pump to the washer nozzles on the hood or cowl i *NM*
    • All depends on what car you are talking about. For example, many cars, even up until the '70s, had a manual pump (on the floor) for the washers. *NM*
      • I'm looking at a 60's era rig, Bill. *NM*
      • Yes, I remember pumping that rubber thingy on the floor with my foot. *NM*
        • Well, on my '69 Dodge with the foot pump, the hose comes out the bottom of the resevoir and goes into a grommet located just about where the floorboards and firewall come together, near driver's right foot. *NM*
    • Good to know...thanks, Scott. *NM*
  • A lot of the GM cars since the early '70s have the washer pump built into the wiper motor. *NM*
    • Right, Steve, so where does the hose plug into the pump/motor? There's an aluminum-looking part & a black cylinder part. Where does the tube go, please? *NM*
      • There's a couple different designs but this is the most common, fitting '68-'72 mid size, 2nd gen E-bodys, etc. *PIC*
        • Just what I needed. Thanks so much. *NM*
  • Re: NEED HELP: Windshield washer reservoir--hose goes from the reservoir to ?? on the washer motor/pump? Google PIX not much help.
  • Thanks, folks, for the help, especially for other years.. *NM*