likely only two, one would go to the regulator, and the other to the battery, or possibly the positive terminal on the starter, which would be hot at all times.

Spotlight Hobbies

Return to Index Read Responses

likely only two, one would go to the regulator, and the other to the battery, or possibly the positive terminal on the starter, which would be hot at all times.

In Response To: How many wires and where do they go from the generator on a 1957 Corvette 4 bbl engine ? Thank you. *NM* ()

Bear in mind that the harnesses are all formed and wrapped, so where each wire goes isn't really visible, especially in scale.

Messages In This Thread

How many wires and where do they go from the generator on a 1957 Corvette 4 bbl engine ? Thank you. *NM*
- I found some diagrams on Corvette Forum. *NM*
- likely only two, one would go to the regulator, and the other to the battery, or possibly the positive terminal on the starter, which would be hot at all times.
- I am pretty sure it is 3 connections (all go into a single loom with only a few inches exposed) on a GM generator but it had a capacitor (little round thing) if it had a radio. *NM*

Return to Index Read Responses

Model Message Board is maintained by Spotlight Hobbies
Powered by some janky old Perl script that's incredibly fragile